Wednesday, February 7, 2018

Truly, Madly, Deeply - FINALLY!


Grab some snacks and sit a spell, this is going to be a long post. You've been warned! 

When I first got a sneak peek of the Heart-Shaped Lantern that would be released in the new Truly, Madly, Deeply collection from Bird's SVGs, I was dazzled. I couldn't wait to build one of my own! 


Bird very cleverly created a separate cut out for the central vellum heart so that it could be embossed in an embossing folder - so cool!  Around the same time, I was watching a Jennifer McGuire video about alcohol ink lifting where she made some beautiful patterns on vellum. I was intrigued to try it and figured why not give it a go on my lantern.

So I inked up a piece of scrap vellum with some red and purple alcohol ink, grabbed a lacy Tim Holtz stencil and tested it out. Fun technique! 


Next I inked up my vellum heart and did the same thing. Unfortunately I forgot to take a picture of the heart after the ink was lifted, but you can see it in the finished lantern.



For the body of the lantern, I kept thinking about what colors I would use to really make it something that would fit into my home decor. I have some black wrought iron furniture with antique gold accents and I thought that might look really great.

I embossed the lid panels with a similar lacy Tim Holtz texture fade (embossing folder) and then rubbed over the embossing with some antique gold wax. I love how the embossing is highlighted this way.


I built the rest of my lantern and also rubbed some of the gold wax around the panels and edges and called it done.  


I liked it, but I just felt like it needed something else. The gold wax didn't come out as well on the body of the lantern as I would have liked. I put it on display and have been lighting it up every night for a week while I pondered my next step. 

Today, inspiration finally struck. I re-cut the offset panels for the outside of the lantern, but this time I used some Tim Holtz metallic kraft paper. I embossed the pieces, painted them with black paint and then wiped some away to get a worn brass look. I glued them to the lantern and now I'm so very happy with it!


Here's a view from the side:


You might wonder how I embossed the large front panel as it doesn't fit through most embossing machines. It's a trick I read about years ago and this was the first time I actually tried it. Rather than putting the embossing folder though a machine, you can roll over it with a rolling pin, or in my case, a brayer. 

The impression isn't as deep as if you ran it through a machine, but it's good enough!  I put a tan embossing mat down on my craft table and then the embossing folder with the paper inside of it and then went to town rolling over it with a LOT of pressure.  Persistence paid off though, and I think the embossing really makes this project come to life.


I added a color-changing electronic tea light inside and it looks magical as it cycles through every color of the rainbow. Watching it glow reminded me of a very unique place I visited as a teenager. 

I grew up less than an hour from Yale University and one of our high school teachers took us on a class trip to the Beinecke Rare Book and Manuscript Library. From the outside, it's an unusual looking building (photo from Google images), but nothing really spectacular. But notice all those square-ish panels...


...they are made of thin marble and when on the inside of the library on a sunny day, the whole place absolutely glows. It's really beautiful and something neat to see if you ever get the chance. You'd never imagine that looking at it from the outside. (Photo from Google images)


So now that I've taken you on a trip down memory lane, you can see why the lighted lantern reminded me of that beautiful glowing marble.


Still with me?  I'm almost done rambling on, I promise!  

If you've made this lantern, what did you do with all of those leftover hearts from your cutting mat? I couldn't bring myself to throw them away! 


Using some painter's tape, I carefully transferred the rows of hearts and glued them to a piece of 4" x 5.25" cardstock. Once they were all glued down, I ran the whole panel through my Cuttlebug with an embossing folder. Then I glued it onto a gold glitter pre-made A2 card.  Now I've got an extra card for the next time I need one. All I'll need to do is add a sentiment to the front and it'll be ready to go. 


I really appreciate the fact that you've stuck with me this far. I hope you didn't run out of snacks! Thanks for stopping by and I'd truly love to hear what you think of my lantern if you'd like to leave a comment below.

13 comments:

  1. That Library is stunning, I bet it's lovely sitting in there on a warm day.
    Talking of stunning, your lantern is awesome and although it did look good before, the extra panels you added really did finish it off. I had absolutely no idea that the lower panels weren't gilding wax over black card, you made the metallic card match in with the lid perfectly!
    I'm looking forward to using that embossing trick, thanks for all of your helpful ideas Lee :)
    - Bird

    ReplyDelete
    Replies
    1. Thank you so much Bird for creating designs that inspire us all to create such lovely projects!

      Delete
  2. I bet the Library is spectacular in person. What a special memory! Your lantern is just as spectacular with the extra panels. Love the alcohol ink lifting on your center heart. So pretty! Well, I guess I'll have to get my ole rolling pin out! lol Many times I've wanted to emboss a large piece and didn't think of using it. Great idea for the worn brass look. You did a super job and I'm sure you are enjoying yours as much I love using my remote to click mine off and on. A treasure to behold!

    ReplyDelete
    Replies
    1. Thanks Misty! I really am enjoying it and totally love the one you made too. It's so much fun to so all of the different versions.

      Delete
  3. WOW WOW WOW.....Your lantern is amazing and jawdropping! Love how much love went into it with all the techniques you used. Think I have to scraplift some of it :-D

    ReplyDelete
    Replies
    1. Thanks Helle! I did get a little deep into the techniques this time, but it was fun. I need to push myself to experiment more. So many fun things to try!

      Delete
  4. Great lantern AND great stories! Thanks for that tip about using the cutout "confetti" left from cutting the panels -- I'm the same way about seeing cool leftovers and being unable to toss them out. ;-)

    ReplyDelete
    Replies
    1. Thank you Keeral! Since I cut the outside panels, I have twice as many hearts saved up. I'm going to have to make some more cards or come up with a fun way to use them all.

      Delete
  5. Oh Wow what a fantastic lantern you've made and thank you for telling us how you made it, I think it's just so beautiful you're so clever and I love the little tea light. I haven't got any of those can you tell me please where to get them from are they off the internet? I also love your card.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Thanks so much Happycrafter! The light I used actually came from Home Depot at Halloween time - it's meant to go in a carved pumpkin. But if you look online, maybe on Amazon, just search for "color-changing tea light" and you're bound to find tons of them. Some of them even come with remote controls although I find that those really go through batteries very quickly. The one I have is about three inches wide, so it's definitely a larger tea light.

      Delete
  6. I am in Love with it too! I can see how much the embossing added to it. Wow what a nice difference. Thanks for sharing.
    XO April

    ReplyDelete
    Replies
    1. Thanks April! I love how much embossing can really kick up a project.

      Delete